{{results.messages.text}}
Phoenix 3.2A/20 Fire Suit, 2 piece, size as listed on the photo, metric 48 jacket, Just cleaned, certified in 2017, next cert due 2022. I am 5'10" 220, bigger arms and chest, very comfortable,flexible fit. 5-8 to 6'. Does have custom stitching with name and pro line logo. Pants are basically the same as 36" levi jeans.. Wildwood, MO 63011 (636) 288-5510
{{results.messagesById['https://www.racingjunk.com/Suits/183122342/3.2A-20-Fire-Suit.html']}}
**BBC Oliver Billet Rods 7.250 WSB bolts. Cost $1500 new.Low time. $750 **BBC Oliver Billet Rods 7.00 , Custom Age 625+ bolt upgrade. Cost $2000 new. Low time. $850 **BBC Oliver Billet Rods 6.700 , Custom Age 625+ bolt upgrade. Low time $850 **BBC Cam FX, Keyway Lifters, .937" diameter, .150"offset, Low Time , they could pass for new. $700 **BBC Jesel Lifters Tie-Bar, .904 diameter, Dbl Offset....
{{results.messagesById['https://www.racingjunk.com/Rods/183118689/Big-Block-Chevy-Premo-Parts-Garage-Sale-Oliver-Jesel-Cam-.html']}}
.... 4.29 ratio Ford 9" PEM "BRUTE" 3.25" Nodular Iron Case Center Section with Large 9310 PRO 35 spline ring & pinion, Assembled. Great for 1200 plus horsepower. The Center Section will be Assembled and set up for Drag Racing by Professionals. PEM BRUTE case with 9310 PRO 35 spline Ring and Pinion and Steel Spool. Billet Chrome Moly Steel 1350-35 spline Yoke. 3.25 inch OD Bearing size x 2.00" ...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093116/Drag-Race-Center-Section-9-Ford-Brute-Iron-.html']}}
... Big Strong 9 1/2" Ford ring & pinion. This Xtreme Gear Center Section will be Assembled and set up for Drag Racing by Professionals. 4.11 ratio 9.5" Ford 9310 PRO ring & pinion in the 3.25 carrier bearing case. Make sure this big 9.5" ring gear will clear your rear end housing center. Yukon Gear aluminum 3.25" carrier bearing thru-bolt case. 4.11 ration 9.5" Ford Xtreme Gear 9310 PRO Large ...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093122/9.5-Ford-4.11-Ratio-Bolt-Thru-Center-Section.html']}}
... Ford 9" Brute 36 lb. 3.25" Nodular Iron Case Center Section with 9310 PRO ring & pinion, Assembled. This Center Section will be Assembled and set up for Drag Racing by Professionals. PEM Brute Nodular Iron 36 lb. case with 9310 PRO 28 spline Ring and Pinion and 35 spline Steel Spool. Billet Chrome Moly Steel 1350-28 spline Yoke. 3.25 inch OD Bearing size x 2.00" ID bearing surface. Daytona ...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093144/Drag-Race-Center-Section-9-Ford-Brute-Iron-.html']}}
... This Deeper Ratio PEM Racing Brute Gear Center Section will be Assembled and set up for Drag Racing by Professionals. PEM "Brute" Nodular Iron 36 lb. HD Case with 3.25" OD Carrier Bearings US Gear 9310 PRO Standard 28 spline Ring & pinion; made in the USA Choose Ratio; 4.86, 5.14, 5.00, 5.29, 5.43, 6.00, 6.20 and 6.50. PEM 35 spline spool (will not work with Mark William Axles). Black Dayto...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093203/US-Gear-Small-Pinion-9310-9-Ford-Brute-Deeper-Ratio-Ce.html']}}
..... This Standard Size Pinion Drag Race Center Section will be Assembled and set up for Drag Racing by Professionals. Yukon Gear aluminum 3.25" carrier bearing thru-bolt case PEM Gear 9310 PRO Standard Pinion 28 spline Ring & pinion, Choose ratio from menu ( 4.11 or 4.86) PEM Racing Gear 35 spline spool (will not work with Mark William Axles). Black Aluminum Daytona Pinion Support for strengt...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093210/Drag-Race-Center-Section-9-Ford-3.25-Bolt-Thru-Case-PR.html']}}
This Standard Size Pinion Drag Race Center Section will be Assembled and set up for Drag Racing by Professionals. Yukon Gear aluminum 3.25" carrier bearing thru-bolt case US Gear 9310 PRO Standard Pinion 28 spline Ring & pinion,manufactured in the USA Choose ratio from menu ( 4.86, 5.00, 5.14, 5.29, 5.43, 6.00, 6.20 or 6.50 ratio). PEM Racing Gear 35 spline spool (will not work with Mark Willia...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093215/US-Gear-Center-Section-9-Ford-3.25-Bolt-Thru-Case-PRO-.html']}}
... This US Gear Center Section will be Assembled and set up for Drag Racing by Professionals. PEM "Brute" Nodular Iron 36 lb. HD Case with 3.25" OD Carrier Bearings US Gear Gear 9310 PRO Large Pinion 35 spline Ring & pinion,manufactured in the USA using only highest quality 9310 alloy steel. Choose ratio from menu ( 3.40, 3.50, 3.60, 3.70, 3.89, 4.11, 4.29 or 4.57) PEM 35 spline spool (will no...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/183093217/US-Gear-Drag-Racing-Center-Section-9-Ford-Brute-Nodula.html']}}
Xtreme Gear - PG F95/4**BPLW ring & pinion plus F95/SPL40LW Spool Three ratios; 4.11, 4.29 and 4.57. Ring & Pinion and Spool Both Made in the USA. FREE Shipping via UPS Ground in the 48 states USA. PRO 9310 LW Ring & Pinions for DRAG RACING. PRO gear sets are manufactured in the USA from the finest heat treated 9310 steel by US Gear. Three ratios available; 4.11, 4.29 and 4.57. Offset Steel Spo...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182054422/9.5-Ford-9310-Ring-Pinion-40-spli.html']}}
Assembled Drag Racing Aluminum Center Section with 9.5" Ford 9310 PRO Gear and MOSER 3.81" Bolt-Thru Case. FREE Shipping! The Center Section will be Assembled and set up for Drag Racing by Professionals. MOSER aluminum 3.81" thru-bolt case with Xtreme Gear / Precision Gear 9310 PRO 35 spline 9.5" Ford Ring & pinion and Steel Spool. 9310 PRO Ring and pinion is manufactured in the USA using only ...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182096847/Moser-Aluminum-9.5-Ford-Center-Section-Drag-Racing.html']}}
Xtreme Gear Ultralight Combo - 9 inch Ford Offset Steel Spool plus 8620 Ring & Pinion. Both pieces in a combo set. * 8620 alloy LW Ring & Pinions for Racing & Performance. * Gear sets are manufactured in the USA from the finest heat treated 8620 alloy steel. INCLUDES Required Special Offset Steel Spool for the 9" Ford (choose from 28, 31 or 35 spline spool). * Proven Design by Tom Reider * Rati...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182224741/Xtreme-Gear-Ultralight-Combo-9-Spool-.html']}}
Steel Grand National Quick Change Tube. Centerless ground seamless tubing to exact 2.99 to 3.00" OD in .188" wall thickness. Right Hand Thread Snout is CN machined from hi strength alloy steel for a standard 2.5" GN Bearing. This tube presses in a quick change side bell without any additional machining or grinding. You do have to drill and tap after installation for the bell retainer bolts. Ava...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182289945/QC-Steel-Rear-End-Tubes-for-Modified.html']}}
PEM Quick Change Rear End Assembly with 5x5" LW GN Hubs, 31 spline solid axles and .810 Rotors MULTIPLE FEATURE WINS IN 2015 STANDARD FEATURES .188" wall centerless ground tubes Aluminum / Magnesium Alloy Heat Treated Lower Shaft Roller Pinion Nose Bearing Posi Locking Nut on Pinion HD Rear Cover Forged Yoke GN Hub Nuts included 5x5 GN LW Hubs wide 5 31 spline induction hardened axles .810 x 11...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182492561/PEM-Quick-Change-Rear-End-GN-5x5-Assembly-with-Axles.html']}}
High Strength Alloy Steel for higher HP cars with bigger tires. All these Premium QC Gears are REM polished for less friction and longer life. These QC Gears run cooler with REM finishing! LW Drilled Big Gear. Approx. 1.5 lbs. lighter, decreases your rotating weight. Great for crate late models. 10 spline gears- Fits Winters, Frankland, Bulldog (DMI), Tiger, PEM, Halibrand, Jones and other Quic...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182590802/PEM-Premium-Lightweight-Quick-Change-Gear-Set.html']}}
This Center Section will be Assembled and set up for Drag Racing by Professionals. * Yukon Gear aluminum 3.25" carrier bearing thru-bolt case * US Gear Gear 9310 PRO Large Pinion 35 spline Ring & pinion, manufactured in the USA using only highest quality 9310 alloy steel. * Choose ratio from menu ( 3.50, 3.60, 3.70 or 3.89 ) * PEM Racing 35 spline spool (will not work with Mark William Axles). ...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182664102/Large-Pinion-PRO-Gear-9-Bolt-Thru-Center-Section.html']}}
REM ISF Microfinishing of one ring & pinion. You must call for a CN number before sending any parts to be processed. Call 636.234.0975 or email [email protected] Benefits for Motor Sports In extreme environments, such as automobile or motorcycle racing, every component must work in harmony at 100% capacity. Races are won and lost by fractions of a second, so it all comes down to getting the mos...
{{results.messagesById['https://www.racingjunk.com/Rear-Ends/182782403/REM-ISF-Microfinishing-of-Ring-Pinion-up-to-10-O.html']}}
63 Chevy Nova main body hull. all steel and have new quarter panels to be installed and one floor panel. Be great for chassis car candidate. Wildwood, MO 63011 (636) 288-5510
{{results.messagesById['https://www.racingjunk.com/Drag-Racing/183122081/1963-Nova.html']}}
.... DOM Steel, Chrome Moly Steel or Aluminum available. Racing, Street Performance, Light Duty and Off Road. All assemblies with slip yoke are balanced as an assembly. Quick turn-around time on standard drive shaft builds and repair. New OEM quality drive shaft parts. Built on new purpose built assembly, welding, and balance equipment. Contact Brock in Drive Shaft Sales and get a quote on your...
{{results.messagesById['https://www.racingjunk.com/Driveline/183092974/Custom-Drive-Shafts-by-PEM.html']}}
... 1350 Series 3" OD DOM Steel Drive Shaft with 5.5" Transmission Slip Yoke 3.0" OD Steel DOM Tubing x .083" wall thickness Choose 27 spline GM or 32 Spline GM Transmission OEM Style Slip Yoke Specify length; center to center on u-joints up to 60" 1350 Series Spicer Greasable U-Joints 2-3 days to build and ship a custom drive shaft. [email protected]. PEM Racing. 425 Industrial Park Drive St. ...
{{results.messagesById['https://www.racingjunk.com/Driveline/183093223/3-DOM-Steel-Drive-Shaft-1350-series-with-5.5-Tra.html']}}
Post Ad